Your Cart is Empty
$499.00$639.00
RA-X-AMP-500
Radial Engineering X-Amp 500 Active Reamper 500 Series Module
The Radial X-Amp™ is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit. The advantages of Reamping™ are many: when recording, the guitarist need only concentrate on the performance. Working out specific sounds and optimal mic placement can be done later. This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves.
Type: 500 Series
-
-
Radial X-Amp PRODUCT FEATURES:
- Active Reamp® designed for 500 series racks
- 100% discrete class-A electronics for best tone
- Transformer isolated to eliminate hum and buzz
- Easy access front panel jacks & controls
-
Radial X-Amp TECHNICAL SPECIFICATIONS:
The X-Amp 500 is an active Re-amp™ device that interfaces the balanced line-level output from professional recording systems with guitar effects and amplifiers. Two active buffered high impedance outputs with active level controls connect to effect pedals and instrument amplifiers. Each output is transformer isolated to eliminate hum and buzz caused by ground loops. Output-2 includes polarity invert for achieving proper phase alignment between two amps. When installed in a Workhorse 500 series rack the user has access to the Omniport connector. The X-Amp's Omniport is configured as an instrument preamp allowing a guitar to connect and drive the amplifier outputs.
Specifications Specifications are subject to change without notice. The connectors referenced are typicaly found on most 500 series racks. *Refers to use with Radial Workhorse rack and mixer Circuit type: Class-A discrete, transformer coupled Power requirement: 40mA, ±16VDC Frequency Response: 20Hz~20kHz (adjusted for guitar signals -5dB@20kHz) w 100K Ω load XLR Input to XLR Output Omniport to XLR Output* XLR Input to ¼" outputs Voltage Gain: 0dB ±0.5dB -3dB ±0.5dB -0.6dB ±0.5dB THD+N: <0.002% @ 0dBu
(20Hz~20kHz)<0.002% @ 0dBu
(20Hz~20kHz)<0.006% @ 0dB
(1KHz)Noise: -114dB below 0dBu -95dB below 0dBu -98dB below 0dBu Intermodulation Distortion: <0.04% @ 0dBu input <0.005% @ 0dBu input <0.027% @ 0dB input Maximum input: +26dBu +20dBu +19dBu Features XLR input: +4dB, balanced female XLR, AES standard XLR input impedance: 1.2k Ohms XLR output: Parallel 'thru-put' with XLR input, +4dB balanced XLR output impedance: 600 Ohms ¼ OUT-1 & OUT-2: Instrument-level (variable), unbalanced ¼", transformer isolated, ¼ output impedance: 3k Ohms Omniport*: Instrument-level input, unbalanced ¼" Omniport input impedance: 220K Ohms General Shipping Weight: 1.5lbs (0.7kg) Size: Standard 500 series rack format Conditions: For use in dry locations only between 5°C and 40°C Warranty: 3 years, transferable -
Radial X-Amp SYSTEM REQUIREMENTS:
Requires 500 Series compatible rack that meets power requirements.