SoundsEasy
Search
Brands
Products
Copyright © 2005-2013 Sounds Easy Pty Ltd
Version 3.0.15
Privacy Policy
Terms of Sale
Shipping and Returns
Terms of Use
Version 3.0.15
Privacy Policy
Terms of Sale
Shipping and Returns
Terms of Use
Quested S6R - pair (Display Model)
 |
|
|
|
Quested S6R - pair (Display Model) |
||
 $1349.00 RRP $1995.00 Seen a better price? |
|
|
The S6R is the smallest monitor in the S-Series.
This compact self-powered 2-way active monitor is the ideal choice where space is at a premium; the magnetic shielding also facilitates its use in close proximity to CRT monitors.
The sonic performance of the S6R belies its size, the low frequency response being more than adequate for many applications, however, when an extended bass response is required the infinite baffle cabinet design facilitates perfect integration with SB10R sub-woofer which will extend the frequency response down to 25Hz.
The S6R is phase coherent with the S7R and S8R, enabling it to be used in combination with both in multi- channel systems.
Some typical applications include: speech recording, component in multi-channel systems, postproduction, Audio workstations and location recording.
Size (WxHxD) 170(w) x 285(h) x 240(d) mm
Weight 7.5 kgs
Drivers Bass cone - 1 x 130 mm (5”)
High Frequency soft dome - 1 x 28 mm (11/8")
Maximum SPL 104dB (c) continuous pink noise @ 1 m (116 dB (c) per pair RMS music)
Frequency Response 75 Hz-20 kHz ± 2 dB
INPUT
Connector XLR and ¼ inch Jack combo socket
Impedance 10k electronically balanced with RF filters
Wiring Pin 1 ground Sleeve
Pin 2 hot Tip
Pin 3 cold Ring
Sensitivity -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
FILTERS
Subsonic -3dB @ 45 Hz, 24dB/oct
Ultrasonic -3dB @ 75kHz, 4dB/oct
Crossover 1k19
LF EQ -2/-4 @ 82 Hz
HF EQ +/- 2dB @ 10 kHz
POWER AMPLIFIER
LF output power > 65W RMS continuous (note 1)
HF output power > 45W RMS continuous (note 1)
T.H.D. < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz
Hum + Noise > -100 dB referred to clip
NOTE 1: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.
INDICATION
Power on Front mounted green LED indicates power applied.
Clip Red LED 2 dB before amplifier clip.
POWER REQUIREMENTS
Voltage Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC
230V setting: min 160V; restricted output power: max 255V
115V setting: min 80V; restricted output power: max 127V
CONSUMPTION
Quiescent 12W
Typical use 45W (average music)
Max 90W (average music)
Note 0 dBu = 775 mV into open circuit
Weight 7.5 kgs
Drivers Bass cone - 1 x 130 mm (5”)
High Frequency soft dome - 1 x 28 mm (11/8")
Maximum SPL 104dB (c) continuous pink noise @ 1 m (116 dB (c) per pair RMS music)
Frequency Response 75 Hz-20 kHz ± 2 dB
INPUT
Connector XLR and ¼ inch Jack combo socket
Impedance 10k electronically balanced with RF filters
Wiring Pin 1 ground Sleeve
Pin 2 hot Tip
Pin 3 cold Ring
Sensitivity -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
FILTERS
Subsonic -3dB @ 45 Hz, 24dB/oct
Ultrasonic -3dB @ 75kHz, 4dB/oct
Crossover 1k19
LF EQ -2/-4 @ 82 Hz
HF EQ +/- 2dB @ 10 kHz
POWER AMPLIFIER
LF output power > 65W RMS continuous (note 1)
HF output power > 45W RMS continuous (note 1)
T.H.D. < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz
Hum + Noise > -100 dB referred to clip
NOTE 1: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.
INDICATION
Power on Front mounted green LED indicates power applied.
Clip Red LED 2 dB before amplifier clip.
POWER REQUIREMENTS
Voltage Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC
230V setting: min 160V; restricted output power: max 255V
115V setting: min 80V; restricted output power: max 127V
CONSUMPTION
Quiescent 12W
Typical use 45W (average music)
Max 90W (average music)
Note 0 dBu = 775 mV into open circuit
No System Requirements.
No associated reviews at present.
No associated links at present.
No associated Tech-Know items at present.
No downloads at present