Your Cart is Empty
$230.00$289.00
RA-SB-6
Radial Engineering StageBug SB-6 2-channel Passive Audio Isolator
The Radial StageBug SB-6 is a high-quality 2-channel passive audio isolator that effectively eliminates noise from both balanced and unbalanced signals. The StageBug SB-6 can be used with instruments, consumer electronics and professional line-level devices. The design of the SB-6 starts with ¼" TRS inputs and outputs to accommodate both TRS and mono connectors. The unique circuit retains the balanced signals or automatically converts them from hi-Z to lo-Z (¼" mono to TRS) or lo-Z to hi-Z (1/4"TRS to mono) depending on the connector in use. All you need to do is connect and the SB-6 does the hard work for you!
Type: DI Boxes
-
-
RADIAL STAGEBUG SB-6 PRODUCT FEATURES
Inside are two ultra-linear Eclipse transformers that sound great as they deliver ruler flat performance from 20Hz to 20kHz. This is augmented with a -10dB input pad to handle extra loud source devices and a polarity reverse on output B for phase aligning stereo signals. As the circuit is passive, no power is required – simply plug in and play. As with all Radial products, the SB-6 is made in Canada and features 16 gauge steel construction for use on the road and finished in a durable powder coat finish.
These features combine to make the SB-6 Isolator a wonderful solution to help rid system noise in two channel audio systems, stereo guitar racks and pedalboards.
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
-
RADIAL STAGEBUG SB-6 TECHNICAL SPECIFICATIONS
Specifications
Audio circuit type:
Passive Transformers
Frequency response:
20Hz-20KHz +/-1db
Dynamic range:
>140db
Maximum input:
>+25dBu
Gain:
-2dB
Total harmonic distortion:
<0.0008% @ 1kHz
Phase deviation:
>5° @ 30Hz
Input impedance:
Varies with Load/47K
Output impedance:
600Ω
Features
Transformer:
Eclipse Custom
Input pad:
-15dB
Polarity:
180deg reverse
Ground lift:
Disconnects TRS sleeve at output
Input connector:
1/4" TRS phone
Output connectors:
1/4" TRS phone
General
Construction:
14 gauge steel chassis & outer shell
Finish:
Durable powder coat
Size: (L x W x D)
4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
Weight:
0.9 lbs (408 grams)
Shipping size: (L x W x D):
8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight:
1.0 lbs (453 grams)
Power:
Passive, no power required
Conditions:
For use in dry locations only between 5°C and 40°C
Warranty:
Specifications are subject to change without notice.