Free Shipping on most orders over $100* (Excludes Studio Furniture)

0

Your Cart is Empty

Dave Smith Instruments

DSI-DSM03FEEDBACK

Dave Smith Instruments DSM03 Feedback Module

The DSM03 from Dave Smith Instruments, is a modular hardware-synth component designed for the Eurorack modular synthesizer format. Essentially, the DSM03 offers tuned feedback. It also features a resonant LP filter, and a triggerable noise source. Tuned feedback is a staple feature of DSI hardware synths, and can be found in the Pro 2 and Pro 12 Prophet synthesizers.


    • Dave Smith Instruments DSM03 Features:

      Plug It In and Tweak It

      The DSM03 is a 10HP wide, standard Eurorack-format device with interconnections made using 3.5 mm phone jacks. A set of inputs allow individual voltage control of feedback amount, tuning, low-pass filter frequency, and filter resonance. The module provides one audio input and one audio output as well as an audio trigger input for the noise source.

      New Filter Design

      The 4-pole, resonant, lowpass filter is a new digital design, based partially on classic analog filters of the past. It features over-sampling and numerous refinements to the signal path, which is 24-bit, 96 kHz resolution for outstanding audio fidelity. It’s a great-sounding design that works well both in the feedback context and as a stand-alone tone-shaping tool.

      Creative Possibilities Abound

      So if you’re looking for something esoteric, but still fundamental to the Dave Smith sound, add this secret weapon to your modular arsenal. From Karplus-Strong synthesis to metallic, industrial grit, the creative possibilities are wide open.
    • Dave Smith Instruments DSM03 Specifications:

      In/Out:
      Feedback Amount CV: -5V to +5V
      Tuning CV: -5V to +5V
      LPF Freq CV: -10V to +10V
      Resonance CV: -5V to +5V
      Audio In: -2.5V to +2.5V
      Audio Out: -2.5V to +2.5V
      Audio Trigger In: 0 to +10V

      Power:
      Internal power connector (ribbon cable included)
      Current Draw (5V or 12V operation set by jumper)

      Using 5V supply:
      +5V = 200 mA
      +12V = 10mA
      -12V = 20mA

      Using 12V supply only:
      +12V = 210mA
      -12V = 20mA

      Physical Specs:
      1.99″ W x 5.06″ H (50.5 mm x 128.5 mm)
      Width: 10 HP
      Depth (measured from back of panel with power cable installed): 1.54″ (39 mm)

      Included:
      Mounting screws
      Ribbon cable for power connection
Need more info on the Dave Smith Instruments DSM03?