Order Online or Choose Click & Collect - FREE Shipping on most orders over $100


Your Cart is Empty

DPA Microphones


DPA d:dicate™ 4017B-R Shotgun Mic with Rycote Windshield

Designed for a broad range of applications, the DPA d:dicate™ 4017 Shotgun Mic is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast / ENG / film booming and even studio recording environments.

    • Product Features:

      At just 210 mm (8.3 in) and 68 g (2.4 oz), this mic is one of the shortest and lightest shotgun condenser microphones available. At the same time, it offers impressive accuracy, clarity and musicality. The mic is immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping. It also withstands use in very humid environments with ease.

      The d:dicate™ 4017B Shotgun Microphone features two onboard filters. They are activated via an ingenious switching ring design. With a simple twist of two sturdy rings, engineers can implement a high-frequency boost that adds a 4 dB shelf at 8 kHz. This compensates for hi loss when used with windjammers. A first-order bass roll-off below 120 Hz minimizes handling and wind noise. A permanent third-order high-pass filter at 50 Hz effectively removes unwanted low frequency disturbance from handling and wind noise.

      This solution kit comes with with a Rycote® Windshield and suspension system – a fully-packed and ready-to-go solution.
    • Technical Specifications:

      Directional characteristics: Supercardioid, lobe-shaped
      Principle of operation: Pressure gradient, with interference tube
      Cartridge type: Pre-polarized condenser
      Frequency range: 20 Hz to 20 kHz
      Frequency range, ± 2 dB: 70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz
      Sensitivity, nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
      Equivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
      Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)
      S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 80 dB(A)
      Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak
      Dynamic range: Typ. 119 dB
      Max. SPL, peak before clipping: 138 dB
      Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
      Output impedance: < 150 ohm
      Cable drive capability: 100 m (328 ft)
      Output balance principle: Signal balanced
      Common Mode Rejection Ratio (CMRR): > 40 dB
      Power supply: 48 V Phantom power (± 4 V)
      Current consumption: 4.5 mA
      Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal – phase
      Color: Matte black
      Weight: 68 g (2.4 oz)
      Microphone diameter: 19 mm (0.75 in)
      Capsule diameter: 19 mm (0.75 in)
      Microphone length: 212 mm (8.3 in)
      Output voltage, RMS: > 1.8 V
      Polarity: +V at Pin 2 for positive sound pressure
      Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
      Relative Humidity (RH): Up to 90 %