-
-
Product Features:
Completely invisible when used with Button-Hole Mount or Concealer
Exceptional audio quality
Uniform, consistent sound between DPA mics
Modular adapter system fits most professional wireless systems
-
Technical Specifications:
Directional pattern : Omnidirectional
Principle of operation: Pressure
Cartridge: type Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range: ±2 dB 20 Hz - 20 kHz, 3 dB soft boost at 5 - 20 kHz
Button-hole mount: 20 Hz - 18 kHz, 5 dB soft boost at 5 - 18 kHz
Sensitivity: nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level: ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
S/N ratio (A-weighted): re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dB(A)
Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
Dynamic range: Typ. 100 dB
Max. SPL: peak before clipping 134 dB
Output impedance: From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply: (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector: MicroDot
Color: Black, beige, brown or white
Weight: 8.5 g (0.3 oz) incl. Cable and MicroDot connector
Cable length: 1.8 m (5.9 ft)
Cable color: Black, beige or brown
Cable: diameter 1.6 mm (0.06 in)
Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%
