SOUNDS EASY IS OPEN AND ACCEPTING ORDERS - FREE SHIPPING OVER $100*  COVID-19 UPDATES

0

Your Cart is Empty

RME

RME-ADI4DD

RME ADI-4 DD 8-Channel 24-Bit/96kHz AES/ADAT Format Converter

The RME ADI-4 DD is a digital audio format convertor that converts 8 channels of AES to ADAT and 8 channels of ADAT to AES. The RME ADI-4 DD will operate at 24-bit, and sample rates of up to 96kHz. RME have incorporated their outstanding SteadyClock technology, and the internal jitter suppression make the RME ADI-4 DD a rest easy choice for those needing a high-end digital audio format conversion solution.


    • RME ADI-4 DD PRODUCT FEATURES:

      The device basically consists of two converters: four AES-3 inputs to double ADAT outputs, and double ADAT inputs to four AES-3 outputs. The double ADAT ports enable full 8 channel support, from 32 kHz up to 96 kHz (S/MUX). The unit provides one XLR I/O directly. A DB-25 connector allows for a use of industry standard AES-3 I/O breakout cables. Setting an internal connector easily changes the DB-25 connector to meet the pinout of Tascam (Digidesign), Yamaha and Euphonix cables.

      Application examples:
      AES/EBU frontend for RME's digital I/O cards (ADAT optical I/O)
      Serves as 8-Channel AES and ADAT I/O for all digital mixing desks with ADAT or AES ports
      Allows to operate up to 4 SPDIF or AES devices
      Converts between AES-3, SPDIF and SPDIF optical
      Removes jitter from AES-3 and ADAT signals

      Conversion modes (selection):
      8-Channel AES to ADAT optical converter (96 kHz)
      2-Channel AES to 8-Channel ADAT splitter (96 kHz)
      8-Channel ADAT to AES converter (96 kHz)
      2-Channel AES to 8-Channel AES splitter (96 kHz)
      4-Channel AES Double Wire to AES Single Wire converter (96 kHz)
      4-Channel AES Single Wire to AES Double Wire converter (96 kHz)

      All in all the ADI-4 DD shows an unsurpassed flexibility together with a sensational price point. It is a perfect interface solution in all areas, from home user up to broadcast applications.
    • RME ADI-4 DD TECHNICAL SPECIFICATIONS:

      Connectivity:
      5 x AES/EBU I/O (1 x XLR, 4 x D-sub)
      2 x ADAT I/O (optical)
      1 x SPDIF (optical, instead 2nd ADAT I/O)
      1 x Word Clock I/O

      Dimensions:
      215 x 44 x 100 mm

      Cables (not included)

      BO25MXLR4M4F3: Digital Breakout Multicore, D-Sub to 4 x XLR-F / 4 x XLR-M, 3 m
      BO25MXLR4M4F6: Digital Breakout Multicore, D-Sub to 4 x XLR-F / 4 x XLR-M, 6 m

      Input AES/EBU: 1 x XLR, 4 x via DB-25 connector, electrically isolated, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible
      Output AES/EBU: 1 x XLR, 4 x via DB-25 connector, transformer balanced, 5 Vpp
      SPDIF Optical: Second ADAT port can be switched to serve as SPDIF I/O
      Input ADAT® optical 2 x TOSLINK, 24-Bit, Bitclock PLL
      Output ADAT® optical: 2 x TOSLINK, 24-Bit
      Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal)
      Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
      Sync sources: ADAT optical, AES/EBU, word clock
      Varipitch: by input signal or word clock
      Sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)
      Sample rate range: AES, word clock: 27 kHz-105 kHz, ADAT 33 kHz - 57 kHz
      Jitter: Internal clock < 1 ns, word clock In < 2 ns, ADAT In < 2 ns
      Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems
      Jitter suppression: circa 30 dB (2.4 kHz)
      Power Supply: Operates with voltages ranging from 7-30V DC oder AC, allowing operation with practically any power source, including batteries
      External high-quality switching power supply included, for worldwide operation at 100-240 Volt
Need more info on the ADI-4 DD? Click HERE for the official RME product listing >>>