DPA d:dicate™ 4018C Compact Supercardioid Mic

$2,199.00$2,949.00

DPA Microphones

DP-4018C

DPA d:dicate™ 4018C Compact Supercardioid Mic

Designed for a broad range of long-distance broadcast, ENG and film miking applications, such as booming, dialogue, interview and table or podium use, the d:dicate™ 4018 Supercardioid Microphone offers superb flexibility through modular accessories.

Features

Low noise and high sensitivity
Highly directional for high isolation
Most controlled supercardioid shape
Uniform, frequency independent directionality
Modular flexibility

Specifications

Directional pattern:	Supercardioid
Principle of operation:	Pressure gradient
Cartridge Type:	Pre-polarized condenser
Frequency range:	20 Hz to 20 kHz
Frequency range, ± 2 dB:	40 Hz - 18 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz:	12 mV/Pa; -38.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
Equivalent noise level, ITU-R BS.468-4:	-
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):	Typ. 78 dB(A)
Total Harmonic Distortion (THD) at 1 kHz:	< 1 % up to 137 dB SPL peak
Dynamic range:	Typ. 121 dB
Max. SPL, peak before clipping:	150 dB
Output impedance:	100 ohm
Minimum load impedance:	2 kΩ
Cable drive capability:	100 m (328 ft)
Output balance principle:	Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR):	> 60 dB
Power supply (for full specifications):	48 V Phantom power (± 4 V)
Current consumption:	2.8 mA
Color:	Matte black
Weight:	58 g (5.6 oz)
Diameter:	19 mm (0.75 in)
Capsule diameter:	19 mm (0.75 in)
Output voltage, RMS:	4.5 V
Microphone Length:	64 mm (2.5 in)
Polarity:	+V at Pin 2 for positive sound pressure
Connector:	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Matching tolerance:	± 1 dB
Temperature range:	< 10 °C