Your Cart is Empty
Brown Sound Limited Edition
This custom TONEX ONE delivers the amazing tones of the TONEX Brown Sound Signature Collections directly to your pedalboard. Picture performing with the rich tones from those classic albums as part of your stage setup. There’s no easier way than with TONEX ONE.
Available in three colours, these ultra-compact pedals fit anywhere on your board and come pre-loaded with 20 carefully created presets using Tone Models from all three Brown Sound collections. Each pedal unlocks the Brown Sound 78/79 collection along with your choice of one other Brown Sound Signature Collection
The explosive tones of two iconic albums
Every decision behind the Brown Sound 78/79 was made to capture not just the gear, but also the attitude, the feel, and the raw sonic blueprint of a genre-defining moment in rock history. With a mix of confirmed and speculated setups, including alternate speakers such as the 4×12 combo cab loaded with two vintage JBL D120s and two 25W Greenbacks, these Tone Models deliver stunning accuracy and creative flexibility. Complete the experience with Sunset Sound Studio Reverb and recreate the tone that changed guitar forever.
Captured Cabinets:
- Marshall 1960A loaded with Celestion G12M 25W Blackbacks (75 Hz)
- Marshall 1960A with Celestion G12M 25W Greenbacks (75 Hz)
- Marshall 1960A with Celestion G12EVH / Heritage 20W Greenbacks (75 Hz)
- Marshall 1960B “Peeled” combo cab loaded with two 25W Greenbacks (75 Hz) and two JBL D120 speakers
Studio Magic: Captured like an album
Every cab was miked with classic SM57s and run through a vintage-style analog console to capture the recorded vibe as authentically as possible. Each tone was sculpted like a real studio mix, and the results come frighteningly close to the album sound. Plug in a guitar with PAF-style pickups and you’ll feel like you’ve stepped into Sunset Sound Studios circa ′78/′79. A few captures were created using a U67 placed further back to increase resonance and soften the top end, making them perfect for double tracking with brighter, more articulate tones.
For players who want a bit more edge, we’ve included alternate “Hot” Tone Models, created by driving the analog mic preamp harder to add extra gain and saturation, just like what you hear on many early recordings.
Signal chain: Secret sauce included
Beyond the amp and cab, the front-end signal was run through the exact vintage pedals used in the original recordings, even when bypassed, to retain their subtle but crucial tonal imprint.
Signal chain:
- Vega Wireless system (used on several ′79 captures)
- 1977 MXR MX117 Flanger
- Mid-′70s MXR MX101 Script Logo Phase 90
- 1970s Maestro Echoplex EP-3
- 70 feet of Belden 8410 & 8412 guitar cable (for realistic high-end rolloff and cable capacitance)
The Vega wireless touch
Several captures using the Vega Wireless system are included. Many players famously used it, even in the studio, for its slight compression and subtle tone thickening. This collection contains Tone Models with and without the Vega, allowing you to dial in either approach. The transmitter was captured with 3 gain levels, providing standard and 2 lower gain settings. This cleans up hotter pickups and adds more articulation to your sound.
TONEX ONE feeding a FRFR or powered cabinet
If you want to use TONEX with your FRFR Cabinet (or powered cabinet), you can plug in directly. Remember to activate the cab section.
This is an example of using the pedal alone with an FRFR Cabinet:
TONEX ONE for recording
You can also use TONEX ONE as an audio interface to record your guitar parts by connecting it to your computer via USB. You can monitor with zero latency through the pedal using headphones or by connecting active monitors to the stereo output of TONEX ONE using a Y cable.
TONEX ONE can be powered via its USB C port when connected to a computer.
This is an example of using the TONEX ONE for recording:
TONEX FX
The TONEX Editor is available for all TONEX users. It gives you access to 8 FX, including 2 delays, chorus, flanger, tremolo, phaser, rotary and new spring reverb. Two FX blocks can be configured pre- or post-amp and cab for maximum customisation. The 8 FX are compatible with TONEX Mac/PC, TONEX Pedal, and TONEX ONE, including Limited Edition units.
7 Slots with 15 FX
- Modulation: Chorus, Tremolo, Phaser, Flanger, Rotary
- Delay: Digital, Tape
- Reverb: Spring 1, Spring 2, Spring 3, Spring 4, Room, Plate
- Compressor
- Noise Gate
TONEX SE and AmpliTube 5 SE software included:
The TONEX SE Librarian
TONEX SE is the revolutionary AI Machine Modelling software that’s taking the world by storm, offering not only thousands of rigs that are indistinguishable from the real thing but also the possibility of modelling any real rig and turning it into a plug-in. You can model your amps, cabs or pedals including distortion, overdrive, EQ, fuzz, boost and more, and play them inside TONEX and AmpliTube.
TONEX ONE goes beyond the stage with the massive ToneNET community sharing new tones daily (currently offering well over 25,000 Tone Models). Explore, demo and download, or share gear captures with the community instantly within the included TONEX software.
TONEX ONE represents a revolution for guitar and bass players. Throw it in the gig bag and never leave home without the best rigs in the world.
AmpliTube 5 SE
AmpliTube 5 SE includes 80 pieces of gear that cover a wide range of stomp and rack effects, amps, cabs, speakers, mics and rooms with complex series/parallel rig chains easily built by drag and drop to emulate any type of sound.
Both software applications include access to the ToneNET online service where there are now over thousands of AmpliTube presets and TONEX tone models to explore, produced and expanded daily by a thriving community of guitar and bass players.