

DBX 560a
Finally DBX has made a 500 series version of their classic DBX 160 VCA compressor with Overeasy at a significantly reduced price. This is the go to compressor for recording drums and guitars. The DBX160 has a super fast attack so it's great for slamming snare drums. It's also very simple to use with controls for threshold, ratio and output gain. It has a great 19 segment gain reduction LED for metering. ย
Type: 500 Series - Compressor
Featuring the same switch-selectable OverEasyยฎ and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Itโs also versatile enough to go from subtle compression to "brick wall" peak limiting.ย Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A's Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.
The 560A's 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A's unique "INFINITY +" inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.
Input Typeย ย ย ย
Electronically balanced/unbalanced, RF filtered
Input Impedanceย ย ย ย ย
40kฮฉ balanced, 20kฮฉ unbalanced
Maximum Input Levelย ย ย ย ย ย ย ย ย
+22dBu
CMRRย >40 dB; typically >55 dB at 1 kHz
Output Typeย
Electronically balanced/unbalanced, RF filtered
Output Impedanceย ย
Balanced 30ฮฉ , unbalanced 15ฮฉ
Maximum Output Levelย ย ย ย ย ย
+22dBu
Frequency Responseย ย ย ย ย ย ย ย ย ย ย
20 Hz โ 20 kHz, + 0/-0.5 dB; 0.5 Hz โ 100 kHz, +0/-3 dB
Noiseย ย
<-97 dBu, Unweighted (22 Hz โ 22 kHz)
THD+Noiseย ย ย ย
<0.005% typical, No compression, 1 kHz input at 0 dBu; <0.07% typical, Any Amount of Compression up to 40 dB @ 1 kHz
Dynamic Rangeย ย ย ย ย ย ย ย
>119 dB
Compression Gain Adjustment Rangeย ย ย ย ย ย ย
Variable from -20 dB to +20 dB
Compressor Threshold Rangeย ย ย ย ย ย ย ย
-40 dBu to +20 dBu
Compressor Threshold Characteristicย ย ย ย ย ย ย
Selectable OverEasyยฎ or Hard Knee
Compressor Ratioย ย ย ย ย
Variable 1:1 toโ :1 thru to -1:1; 60dB Maximum Compression
Compressor Attack Timeย ย ย ย ย
Program-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
Compressor Release Timeย ย ย
Program-Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/Sec Rate
Power Requirementsย ย ย ย ย ย ย ย ย ย ย
+/- 16VDC
Current Drawย ย ย ย ย ย ย ย ย ย ย
60mA per power rail
Power Drawย ย
1.92 watts
Rack System Compatibilityย ย
500 Series Compatible Power-frame
Rack Spaceย ย ย ย
1 Slot
Dimensions (H x W x D)ย ย ย ย ย ย
5.25โ x 1.5โ x 6โ (13.34cm x 3.81cm x 15.24cm)
Weightย ย ย ย ย ย ย ย ย ย ย
1.3 lbs (0.59 kg)
Shipping Weightย ย ย ย ย ย
1.7 lbs (0.77 kg)
* Requires a 500 series rack unit to operate. Soldย Separately.