Search

Palmer RIVER Wipper Passive DI box

  If you need to pick up the pure sound of your guitar, bass or keyboard, you need a high-quality DI-Box which does not alter the natural sound or add any noise. The Palmer wipper is a single channel passive DI box...

Palmer MONICON XL Active Studio Monitor Controller

An absolutely clear-sounding signal is a must in the studio if you want work to go your way. The Palmer MONICON® XL lets you do just this: it makes it possible to configure the sound yourself, to route different sources...

Palmer RIVER Wupper Passive Line Isolation Box

  The more complex the setup, the higher the chance of ground loops. With the Palmer wupper Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing. The Palmer wupper is an isolation transformer in a robust...

Palmer RIVER Elde Passive 2-Channel DI-Box

  Are you looking to pick up the raw signal from a guitar, bass or keyboard without noise and tonal loss, even over long cable runs? That's exactly what the Palmer elde does - simply and reliably. Especially since the elde is a classic...

Palmer MONICON® L Passive Monitor Controller

  The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via...

Palmer Monicon Passive Monitor Controller

Palmer Monicon® and the volume is right! With Palmer Monicon®, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor...

Palmer RIVER Naab Passive 2-Channel Media DI-Box

  If you connect a laptop to a sound system, in many cases the sound quality leaves a lot to be desired. It hums and crackles, sometimes there is also a loss of sound in the low and high frequencies....

Palmer RIVER Kyll Passive 2-Channel Line Isolation Box

  Consumer devices, as well as many professional keyboards such as synthesisers and digital pianos as well as some small mixers have unbalanced outputs. In order to connect them to a professional sound system and to avoid interfering noise over...

Palmer PAN 04 A Active 2-Channel DI Box

The Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing desk’s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused...

Palmer RIVER Enz Two Channel Unbalanced Line Isolation Box

  When connecting a media player or a laptop to a HiFi- or PA system, you often experience noise such as hum and buzz caused by ground loops. With the Palmer enz, With the Palmer enz, you can be sure that such...

Palmer BC 400 AA Professional 19" Rackmount Battery Charger

  Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA...

Palmer PWT 06 IEC Universal Pedalboard powersupply with USB

A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. And that's where the PWT 06 IEC comes in. With six high...

Palmer PAN 03 19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format....

Palmer PAN 16 19" DI Box 8 Channels passive

The Palmer PAN16 is an 8 channel passive DI box in a 19" 1U rack format. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the...

Palmer PWT 06 IEC Universal Pedalboard Power Supply with USB

Leave the noise behind A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. That's where the PWT 12 IEC comes in....

Palmer MONICON® L Passive Monitor Controller (Display Stock)

The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the...

Palmer Grand Audition MKII 24-Channel Loudspeaker Switching System

When tasting wine, it is important that a comparison is as neutral as possible. The same applies to selecting loudspeakers.To accurately judge sound characteristics, it is essential to listen to different loudspeakers under the same conditions. Comfortable loudspeaker routing with...

Palmer RIVER Peene Passive 2-Channel Line Splitter

Do you want to send a line signal - stereo or dual mono - to multiple devices, without interference such as hum? Then the Palmer peene line splitter box is the right tool for you. It works on a purely passive basis...

Palmer WTPB40 RK Power supply unit with 8 outputs for rack mounting

  Working with effects units and patchbays in the studio opens up creative possibilities for discovering new sounds. If it weren't for the hassle of power supply and the accompanying cable clutter. For this very reason, Palmer® offers the Powerbar...

Palmer PAOCLXLRF AoC LOOM XLRf - Audio Over CAT Loom from etherCON to 4 XLR FEMALE

The P AOC L XLR F is a multicore adapter cable that facilitates the stable transmission of 4 separate analogue and balanced audio signals or 8 digital AES3 signals through a network cable (not included). The female XLR plugs are...

Palmer PDI 03 JB Joe Bonamassa Signature Model Guitar Speaker Simulator DI

The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced direct feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load....

Palmer 19" 4 CH ACTIVE DI RACK W/ AoC (Audio over CAT)

Are you aiming to capture the pure signal from a guitar, bass, or keyboard without any noise and tonal loss, even over long cable runs? In that case, you need a DI box - and a high-quality one at that...

Palmer PAOCBXLRM AoC BOX XLRm - Audio over Cat5 Box from Ethercon to 4 XLR MALE

The AOC B XLR M is a multicore box that facilitates the stable transmission of 4 separate analogue and balanced audio signals or 8 digital AES3 signals through a network cable (not included). To mitigate the risk of ground loops,...

Palmer PAOCLXLRM AoC LOOM XLRm - Audio over CAT Loom from etherCON TO 4 XLR Male

The P AOC L XLR M is a multicore adapter cable that facilitates the stable transmission of 4 separate analogue and balanced audio signals or 8 digital AES3 signals through a network cable (not included). The male XLR plugs are...

Palmer PAOCLTRSM AoC Loom TRSm - Audio over CAT Loom from etherCON to 4 x 6.33mm TRS JACK

The P AOC L TRS M is a multicore adapter cable that facilitates the stable transmission of 4 separate analogue and balanced audio signals through a network cable (not included). The 6.3 mm TRS jacks are numbered and color-coded for...

Palmer PAOCBXLRF AoC BOX XLRf - Audio over CAT 5 box from Ethercon to 4 XLR FEMALE

The AOC B XLR F is a multicore box that facilitates the stable transmission of 4 separate analogue and balanced audio signals or 8 digital AES3 signals through a network cable (not included). To mitigate the risk of ground loops,...

Palmer release their Audio over Cat series

March 04, 2025

Read More

Palmer PAN 04 DI Box 2-Channel passive

The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box....

Palmer 19" 4 CH Passive DI Rack with AoC (AUDIO OVER CAT)

Are you aiming to capture the pure signal from a guitar, bass, or keyboard without any noise and tonal loss, even over long cable runs? In that case, you need a DI box - and a high-quality one at that...

Palmer PAN 03 PASS 19" DI Box 4-Channel passive

Passive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice....

Palmer RMMS 8 8-Channel Microphone Splitter

The PRMMS8 is an ultra low noise 8-channel microphone splitter providing a direct output and a transformer isolated output for each balanced XLR input. For extra flexibility, four front panel switches enable channel linking which permits routing a single input...

Rode Deadcat Windshield

AU-C5997521 The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. Deadcat Specifications Weight 22.00g Dimensions 31.00mmH...