DPA d:dicate™4018FJS Supercardioid Mic, Single 75 cm Boom, Floor Stand

• Low noise and natural voice
• Highly directional for high isolation
• Uniform, frequency independent directionality
• Exclusive, elegant design
• Integrated shock-mounting in floor base
• Rapidly stabilizing microphone boom pole
• Modular flexibility (d:dicate™ capsules)

A complete cardioid microphone floor stand solution in the modular d:sign™ Microphone Series offering a high-quality stage voice or instrument mic.

Specifications

Directional pattern:	Supercardioid
Principle of operation:	Pressure Gradient
Cartridge Type:	Pre-polarized condenser
Frequency range:	20 Hz to 20 kHz
Frequency range, ± 2 dB:	40 Hz to 18 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz:	12 mV/Pa; -38 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
Equivalent noise level, ITU-R BS.468-4:	-
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):	Typ. 78 dB(A)
Total Harmonic Distortion (THD) at 1 kHz:	< 1 % up to 137 dB SPL peak
Minimum load impedance:	2 kohm
Dynamic range:	Typ. 121dB
Max. SPL, peak before clipping:	142dB
Output impedance:	100 ohm
Cable drive capability:	100 m (328 ft)
Output balance principle:	Impedance balancing
Common Mode Rejection Ratio (CMRR):	> 40 dB
Power supply (for full specifications):	48 V Phantom power (± 4 V)
Current consumption:	3.5 mA
Color:	Matte black
Weight:	-
Microphone Diameter:	19 mm (0.75 in)
Capsule diameter:	19 mm (0.75 in)
Output voltage, RMS:	2.2V
Microphone Length:	-
Polarity:	+V at Pin 2 for positive sound pressure
Connector:	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Relative Humidity (RH):	Up to 90%
Temperature range:	-40 °C to 45 °C (-40 °F to 113 °F)