DPA d:dicate 4017B Shotgun Microphone

DPA d:dicate 4017B PRODUCT FEATURES:

- Small and lightweight
- Excellent RF Immunity
- Uniform off-axis response
- Highly directional pattern

DPA d:dicate 4017B TECHNICAL SPECIFICATIONS:

Directional pattern
Supercardioid, lobe-shaped

Principle of operation
Pressure gradient, with interference tube

Cartridge type
Pre-polarized condenser

Frequency range
20 Hz - 20 kHz, permanent third order high pass filter at 50 Hz

Frequency range, ±2 dB, at 60 cm (23.6 in)
70 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz

Sensitivity, nominal, ±2 dB at 1 kHz
19 mV/Pa; -34.4 dB re. 1 V/Pa

Equivalent noise level, A-weighted
Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))

Equivalent noise level, ITU-R BS.468-4
Typ. 24 dB (max. 26 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 81 dB(A)

Total harmonic distortion (THD)
< 1% up to 137 dB SPL peak

Dynamic range
Typ. 124 dB

Max. SPL, peak before clipping
138 dB

Switchable attenuator, filters etc.
High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz

Output impedance
100 Ω

Minimum load impedance
2 kΩ

Cable drive capability
100 m (328 ft)

Output balance principle
Signal balanced

Common mode rejection ratio (CMRR)
> 40 dB

Power supply (for full performance)
48 V Phantom power (± 4 V)

Current consumption
4.5 mA

Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase

Color
Matte black

Weight
68 g (2.4 oz)

Microphone diameter
19 mm (0.75 in)

Capsule diameter
19 mm (0.75 in)

Microphone length
212 mm (8.3 in)

Maximum output voltage, RMS
2.0 V

Polarity
+V at pin 2 for positive sound pressure

Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%