Your Cart is Empty
The Radial X-Amp is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.
FEATURES
-
Active Reamp® device with two outputs
-
Uses a 100% discrete class-A signal path
-
Transformer isolated to eliminate noise
-
Variable 'set & forget' level control
SPECIFICATIONS
| Specifications | |
|---|---|
| Specifications are subject to change without notice. | |
| Audio circuit type: | 100% discrete class-A |
| Frequency response: | 20Hz ~ 15kHz (± 1.0dB) |
| Signal to noise ratio: | 88dB below instrument level (-20dBu) |
| Dynamic range: | 119dB |
| Noise floor: | OUT-1 -110dB; OUT-2 -108dBu |
| Maximum input: | +22dBu |
| Total harmonic distortion: | 0.02% @ -15dBu |
| Inter-modulation distortion: | 0.02% @ -20dBu |
| Input impedance: | 600Ω |
| Features | |
| XLR input: | Balanced line-level, AES standard (pin-2 hot) |
| Ground lift (input): | Disconnects pin-1 at the XLR input |
| Output level: | Adjustable |
| Output type: | Out-1 direct, Out-2 isolated |
| Polarity: | 180º polarity reverse on output-2 |
| General | |
| Power: | +15VDC/400mA adapter included |
| Construction: | 14 gauge steel chassis & outer shell |
| Finish: | Durable powder coat |
| Size: | 3.3" x 5.0" x 2" (84 x 127 x 48mm) |
| Weight: | 1.55lb (720g) |
| Shipping Size: | 5" x 2.75" x 10.75" (127 x 70 x 273mm) |
| Shipping Weight: | 2.6lb (1.18kg) |
| Conditions: | For use in dry locations only between 5°C and 40°C |
| Warranty: | Radial 3-year, transferable |