Mojave MA-301fet Condenser Microphone

Mojave MA-301fet PRODUCT FEATURES:

Each MA-301fet microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shockmount.

Features:

• Multi-pattern: Cardioid, Omnidiectional, Figure-eight (Bi-directional)
• Switchable 15dB pad
• Switchable Bass Roll-off
• Hand-selected 3-micron 1" capsule
• Jensen audio transformer
• Military-grade FET
• Custom designed low-noise resistors
• Ultra clean signal path
  
  

Recommended Applications:

• Vocals
• Voice Over and Broadcast
• High SPL sources, such as Kick Drums and Bass Guitar Amps
• Electric Guitar
• Piano
• Drum Overheads, Drum Rooms

Mojave MA-301fet TECHNICAL SPECIFICATIONS:

TRANSDUCER TYPE: Externally polarized, pressure gradient capacitor - double diaphragm.
DIAPHRAGM: 1-inch diameter, gold sputtered
DIAPHRAGM THICKNESS: 3 microns
POLAR PATTERN: 3 patterns; omni, cardioid and figure-8
FREQUENCY RESPONSE: 20 Hz to 20 KHZ, +/-3 dB at "flat" setting of bass cut
switch. Bass cut switch provides 6 dB per octave attenuation below
100 Hertz in "cut" setting
SENSITIVITY: -40.5 dB, re. 1V/pa
MAXIMUM SPL: 120 dB with pad off, 135 dB with pad on.
DISTORTION: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off
< 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on
SELF NOISE: 14dB nominal, not to exceed 16dB (A weighted)
PAD: 15 dB
BASS CUT: 6 dB per octave below 100 hertz.
IMPEDANCE: 550 ohms, transformer balanced (Jensen)
POWERING: 48VDC phantom power; current 1.2 mA
DIMENSIONS AND WEIGHT:
Carrying case with microphone, shock mount: 10" x 9" x 4.5", 4 lbs.
Microphone: 7 5/8" X 2" (194mm x 51mm), 1 lb. (0.45Kg)