Behringer 1050 Mix-Sequencer Module

This is the Behringer 2500 series MIX-SEQUENCER MODULE 1050. An authentic reproduction of the original “System 2500” circuitry from the ‘70s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Integrate the MIX-SEQUENCER MODULE 1050 into your existing rig or start your modular synth journey from here. Either way, you’re sure to have a lot of fun.

Features

• Classic 1050 sequential mixer module from the '70s

• Authentic reproduction of the circuitry from the "2500" Series

• Features sequential switching for rapid selection of waveforms and signals in a conventional audio mixer format

• Dual 4-input mixers with electronically gated inputs and eight-step counter and clock

• Each of the 8 audio inputs has its own attenuator and each dual output has a master gain control

• Can be used as an 8-input mixer with 2 adjustable outputs or as 2 separate 4-input mixers

• Illuminated push buttons select and indicate which inputs are gated

• Exclusive-On push buttons turn on a specific channel while turning off all others to preview signals

• Clock pulse generator can be switched on/off to sequence the channels in numerical order at a rate set by the Pulse Rate control

• A rotary switch controls the step length of the sequence and can set the clock to off

• Module can be clocked externally or connected internally and controlled by the 1027 or connected to a 1026 module to generate preset voltages

• Eurorack specs: 24HP, 110 mA +12 V, 20 mA -12 V

Sequencer or Mixer? You Decide.

The MIX-SEQUENCER MODULE 1050 is a classic 8-channel mixer/sequencer. The 1050 allows you to rapidly select waveforms and signals via a conventional mixer format. Each audio input comes with its own attenuator knob and channel on/off buttons which you can use to mix and/or gate an input. Controlling and altering a sequence on the fly has never been so easy! The attenuator knobs are even color-coded into two groups of four channels which are tied to their respective master gain control. You can use the 1050 as an 8-input mixer with two adjustable outputs or as two separate 4-input mixers. When using the 1050 as a sequencer you can select between a single 8 step sequencer or a dual 4 step sequencers for ultimate flexibility.

Additional Controls

Soloing channels can be really useful for previewing a signal. That’s why each channel in the 1050 has its own Exclusive-On button that turns on that particular channel’s signal while muting the rest, when using the 1050 as a dual 4 input mixer/counter the Exclusive-On buttons automatically split into 2 independent banks of 4. The clock pulse generator on the 1050 is switched on/off or manually stepped via a three-way switch. The speed of the sequence is then controlled by the Pulse Rate control knob. You can also determine the number of steps in a sequence before it repeats via the Counter rotary switch. The 1050 can also be connected and controlled by the CLOCKED SEQUENTIAL CONTROL MODULE 1027 or other compatible modules.