SOUNDS EASY IS OPEN AND ACCEPTING ORDERS -FREE SHIPPING OVER $100* COVID-19 UPDATES

0

Your Cart is Empty

DPA Microphones

DP-2006A

DPA d:dicate 2006A Twin Diaphragm Omni Microphone

The DPA d:dicate 2006A Twin Diaphragm Omnidirectional Microphone features the MMC2006 mic capsule with MMP-A preamp – providing a distinctive, well balanced sound. The 2006A bridges the gap between the extreme sound quality of the d:dicate series, and the miniature microphones in the d:screet and d:fine series. The 2006A sound is comparable to the iconic MMC4006 capsule - it is a premium microphone that offers incredible value for money. You can also easily combine the 2006A with another d:dicate or d:facto Capsule or Preamplifier.

Ships from Warehouse Only - Call to confirm stock before ordering!


    • DPA D:DICATE 2006A PRODUCT FEATURES:

      - Acoustic authenticity

      - Linear in a large frequency bandwidth

      - Twin-Diaphragm-Capsule technology

      - Modular flexibility

    • DPA D:DICATE 2006A TECHNICAL SPECIFICATIONS:

      Directional pattern: Omnidirectional
      Principle of operation: Pressure
      Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
      Frequency range: 20 Hz to 20 kHz
      Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
      Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
      Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
      Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
      S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
      Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
      Minimum load impedance: 2 kohm
      Dynamic range: Typ. 114 dB
      Max. SPL, peak before clipping: 141 dB
      Switchable attenuator: 0 dB / -20 dB
      Output impedance: < 200 ohm
      Cable drive capability: 100 m (328 ft)
      Output balance principle: Impedance balancing with Active Drive
      Common Mode Rejection Ratio (CMRR): > 60 dB
      Power supply (for full specifications): 48 V Phantom power (± 4 V)
      Current consumption: 2.8 mA
      Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
      Color: Matte black
      Microphone weight: 160 g (5.6 oz)
      Microphone diameter: 19 mm (0.75 in)
      Microphone length: 164 mm (6.5 in)
      Output voltage, RMS: > 5 V
      Polarity: +V at Pin 2 for positive sound pressure
      Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
      Relative Humidity (RH): Up to 90%
Need more info on the DPA d:dicate 2006A? Click HERE for the official DPA product listing >>>