Product Code: FUR-PL-8CE

Furman PL-8C E Classic Series Power Conditioner


The Furman PL-8CE can protect your gear from electrical spikes and surges and filter dirty AC power. How does the Furman PL-8CE differ from the Furman Merit 10LX power conditioner? Both offer Surge and spike protection, noise filtering with circuit breaker protection however the PL8CE uses Furman's revolutionary Series Multi-stage Protection (SMP), Linear Filtering Technology (LiFT) and Extreme Voltage Shutdown (EVS) to further protect your devices. The PL8CE also uses Isolated outlet banks to minimize inter-component interference and noise contamination.


      Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.

      You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

      Can't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.

      Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.

      When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust

      Maximum Output Current: 10 amps
      Line Cord: 3/1.0MM AWG, 2.5M cord w/IEC female to 10A Schuko plug
      Pull-out Lights: Two multi-LED, dimmable lamps
      BNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)
      Operating Voltage: 180 to 274 VAC
      Spike Protection Mode: Line to neutral, zero ground leakage
      Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
      Response Time: 1 nanosecond
      Maximum Surge Current: 6,500 Amps
      Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
      Dimensions: 482.6mm W x 266.7mm D x 44.5mm H
      Weight: 6 kg.
      Power Consumption: 12 watts
      Safety Listing: CE
Need more info on the PL-8C E? Click HERE for the official Furman product listing >>>
News & Updates

Sign up to our newsletter to get all the latest news, sales & promotions, new product releases and more …