SPL MTC 2381 Monitor & Talkback Controller

The advantages of the MTC become especially apparent in combination with modern audio and video production tools such as ProTools™, Nuendo™, Cubase™, Logic™, Deck™ etc. Monitor levels and source management can be handled independently of the software and with virtually no loss in quality. You no longer need to set up additional aux sends for monitoring. In addition, you won‘t have to worry about over- or underdriving the converters due to monitor levels.

"Super sound quality. Great ergonomics. All the key facilities you need". Review in SOS (UK)

Cue Mix and Talkback

The latency-free cue mix signal for the musician can be composed of the musician's track and the track mix. The Talkback communications option via built-in microphone provides a footswitch input for remote control and a separate output with the dry talkback signal. These features mean that monitoring in any DAW-based studio now can be expanded to include the kind of essential functionality that to now has only been available in large analog consoles.

Status LEDs

An LED over each front panel switch indicates activity by illuminating when its corresponding switch is turned on.
If the Talkback function is activated by an external switch, the Talk LED will nonetheless illuminate.

Master Volume

The master volume potentiometer globally controls volume for up to three stereo speaker pairs. This analog control regulates the audio signal directly to avoid any colouration/distortion typical of VCAs, DCAs, etc., which require higher inter-channel tolerances and tend toward higher distortion figures. Moreover, this potentiometer possesses an optimal rotational torque and “feel” for precise hand control.

Speaker Calibration

The MTC dispenses with speaker output trims, as they would unnecessarily stress the signal paths-all active speakers and also power amps have input trims. The adjustment process should begin with the quietest monitor pair (smallest sound pressure level) with the input sensitivity at the maximum level. Leaving the MTC Master Volume control as set, you then perform the same adjustment for the other monitor/speaker pairs until each produces the same sound level as the first pair. Lacking a sound pressure level meter, you may still accomplish this adjustment well enough by ear.

Footswitch

This 1/4 inch footswitch input can accept an on/off switch or key that allows remote control of the Talkback function. Any sort of switch or key (including footswitches familiar to keyboard players) can be used here.

Slave Output

The balanced 1/4 inch "Slave Out" jacks provide for summed output of all active 2Tr inputs (Mix, 2TrA to 2TrD). As an example, the monitor signal may also be routed to a recording medium, or, while one listens to a CD player, the output may simultaneously be routed to a DAW. You may likewise connect stereo metering equipment.

The musician‘s signal (coming from the Musician input) is not routed to the Slave Out, as it is only used for latency-free monitoring, but not for recording.

Talk Output

The "Talk Out" connection routes the dry talkback mic signal through its balanced 1/4-inch jack to create an alternative listening option (for example, to another room).
This function is particularly useful when, for instance, the engineer wishes to avoid forcing all performers in the recording room to wear headphones. Also advertising narrators are not often happy wearing headphones. Routing through the "Talk Out" circuit, the engineer can communicate directly to narrators or musicians over an active monitor placed in the recording room.

Headphone output

This is where your headphone can be connected for monitoring the control room mix-in parallel to the chosen loudspeaker monitor pair. The headphone output can be toggled in or out with the HP On switch, so muting is possible without having to detach it each time. 

TECHNICAL SPECIFICATIONS:

Frequency Range: 10 Hz - 100 kHz (+/- 3 dB) 

Input Impedance balanced via TRS: 50 kOhm/unbalanced via RCA: 10 kOhm 

Output Impedance balanced via RCA: 600 Ohm 

THD + N: 0,006 % 

Noise (A-weighted): 80 dBu 

Overload Resistance: +22 dBu 

Dynamic Range: 110 dB CMRR: 70 dBu 

Phase: -20°@20 kHz 

Crosstalk L-R: -70 dB@1 kHz/0 dBu 

Dimensions: H x B x T (mm): 91 x 272 x 220 

Weight: 2,3 kg