Your Cart is Empty
$23,820.00
BRI-M21
Bricasti M21 Dual Mono Source Controller (DAC)
The Bricasti M21 is all class and proves to be one of the best Digital to Analog converters money can buy. It follows on from the now legendary M1 DAC providing three independent and user-selectable digital to analog signal paths: delta sigma and ladder dac for PCM conversion and for DSD playback, true direct DSD. All digital input types are supported, with direct output or hard-wire bypass of the analog attenuator. Not Only is the M21 a high level DAC, it also functions as a high end streamer that connects seamlessly with your home network offering the highest quality and efficient audio playback.
Type: DACs
Bricasti M21 DAC Specs
Digital Inputs XLR: AES/EBU 24 bit Single Wire, BNC: SPDIF, RCA: SPDIF, Optical: Toslink 44.1- 96k, USB 2
Sample Rates AES, SPDIF, AUX in 44.1 kHz, to, 192khz
Sample Rates USB 44.1 kHz, to, 384kHz, DSD 64fs 128Fs as DoP
Sample Rates Ethernet 44.1 kHz to 384kHz, DSD 128
Jitter 8 psec @ 48k / 6psec @ 96k
Balanced Analog Outputs XLR balanced (pin 2 hot)
Impedance 40 ohm
Output @ full scale +16.5 dbm (5.2V RMS)
Output Level 90db in 1 db steps
D/A Conversion PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit, 384Khz ladder dac
Frequency Response @44.1k 10 hz- 20 kHz +0dB, -.2 dB
Dynamic Range >120dB A-Weighted
THD+N @ 1k .0008% @ 0dbfs / .0004% @-30dbfs PCM sigma delta<
Unbalanced Analog Outputs RCA
Impedance 40 ohm
Output level Full scale at front panel +6 dbm (1.2V RMS)
D/A Conversion PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit, 384Khz ladder dac
Frequency Response @ 44.1k 10 hz- 20 kHz -.2 dB
Dynamic Range >120dB A-Weighted
THD+N @ 1k .0008% @ 0dbfs / .0004% @-30dbfs PCM sigma delta
General Specifications EMC: Complies with: EN 55103-1, EN 55103-2, FCC part 15 and Class B
RoHS Complies with: EU RoHS Directive 2002/95/EC
Safety Certified to: IEC 60065, EN 55103-2
Operating Temperature 32 F to 105 F (0 C to 40 C)
Storage Temperature: -22 f to 167 F (-30 C to 70 C)
Finish Anodized aluminum, nickel plating with brass knobs and buttons.
Dimensions 17” x 12“ x 4.5”
Weight 15 lbs
Shipping Weight 18 lbs
Shipping Dimensions 22”x 17”x 7”
Mains Voltage -100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
Trigger out TRS connector for 5V external trigger.
Power consumption: 28 Watts (6W standby)
Warranty parts and labor 2 yrs non-transferable.