ADAM Audio Sub10 mk2 Active Studio Subwoofer

The active Sub10 mk2 subwoofer from Adam features a 10' woofer with plenty of power. Extremely balanced and true low-frequency reproduction. The Sub10 is characterised by its definitive accuracy and true low-frequency sound reproduction. This sub pairs perfectly with the Adam A7X, F7, and S2X for a massive, full-frequency, big studio sound.

Features

• The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.

• A sturdy special woofer with extended cone travel and a heavy-duty coil has been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

• The Sub10 Mk2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).

• All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and variable upper-frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous).

• All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.

Specifications

Subwoofer

• Number 1

• Basket Ø 10" (260 mm)

• Voice coil Ø 2" (50 mm)

• Cone material Paper

• Built-in Amplifiers

• Subwoofer 1

• Amp. power RMS / music 200 W / 300 W

• Analog XLR / RCA

• Panel Rear

• Frequency response 25 Hz - 150 Hz

• THD > 60 Hz ≤1 %

• Peak SPL max at 1m ≥113 dB

• Crossover frequencies 50 - 150 Hz

• Input impedance 10 KOhm

• Weight 46.3 lb (21 kg)

• Height x Width x Depth 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)

• Warranty 5 Years