DP-4017B-R
Designed for a broad range of applications, the DPA d:dicate™ 4017 Shotgun Mic is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast / ENG / film booming and even studio recording environments.
Type: Shotgun Microphones
Directional characteristics: | Supercardioid, lobe-shaped |
Principle of operation: | Pressure gradient, with interference tube |
Cartridge type: | Pre-polarized condenser |
Frequency range: | 20 Hz to 20 kHz |
Frequency range, ± 2 dB: | 70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz |
Sensitivity, nominal ± 2 dB at 1 kHz: | 19 mV/Pa; -34.4 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: | Typ. 25 dB (max. 26 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): | Typ. 80 dB(A) |
Total Harmonic Distortion (THD): | < 1 % up to 133 dB SPL peak |
Dynamic range: | Typ. 119 dB |
Max. SPL, peak before clipping: | 138 dB |
Filters: | High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz |
Output impedance: | < 150 ohm |
Cable drive capability: | 100 m (328 ft) |
Output balance principle: | Signal balanced |
Common Mode Rejection Ratio (CMRR): | > 40 dB |
Power supply: | 48 V Phantom power (± 4 V) |
Current consumption: | 4.5 mA |
Connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal – phase |
Color: | Matte black |
Weight: | 68 g (2.4 oz) |
Microphone diameter: | 19 mm (0.75 in) |
Capsule diameter: | 19 mm (0.75 in) |
Microphone length: | 212 mm (8.3 in) |
Output voltage, RMS: | > 1.8 V |
Polarity: | +V at Pin 2 for positive sound pressure |
Temperature range: | -40 °C to 45 °C (14 °F to 113 °F) |
Relative Humidity (RH): | Up to 90 % |